Sons of David Foundation on Paulownia: Paulownia vs. Balsa

Wednesday, August 19, 2009

Paulownia vs. Balsa

Paulownia Wood... the Cheaper, Stronger Alternative to Balsa Wood

Balsa has been incorrectly considered to have the highest strength to weight ratios of any wood in the world.

Paulownia has been thoroughly tested and found to have a higher strength to weight ratio than Balsa!

Auburn University tested the strength of 18 lb p/cubic ft. Paulownia against Balsa, with an average weight of 10 lbs p/cubic foot.

(See Table 1)

Strength modus of rupture mor (psi)

Balsa

2800

Paulownia

5740

- Source: Dr. R.C. Tang, Auburn University


Some Balsa core material is sliced at 3/8 inch with end-grained material. Paulownia can be cut at 3/16 and offer approximately the same strength and weight. Paulownia offers a space saving benefit, being cut half as thick. There is also a significant cost savings because half as much material is needed.

Lighter grades of Paulownia weigh only 14lbs per cubic foot. This is lighter than many Balsa grades.

When considering the large amount of epoxy that Balsa soaks up, Paulownia gains an even larger weight advantage.

Paulownia is easily carved and can hold nails and screws without splitting. It also provides greater stability and flexibility for making molds and models.


1 comment:

Francis Bell said...

REALLY GREAT NEWS!!! You can now not only heat and cool your home the clean , earth-friendly, and renewable geothermal way-but also your POOL! This is well worth looking into-Francis http://www.geothermalquestions.net